Filter
Top Products
Connecting External Speakers and Audio Cable (not
provided)
Use the following procedure to connect external speakers to a computer.
1. Turn the computer on.
2. Connect the audio cable to the audio-speaker connector on the computer, and then connect the
USB power cable to a USB connector on the computer.
NOTE: Use the volume controls on the computer to adjust the speaker volume.
Figure 3-9 Connect the External Speaker Audio and USB Cables (not provided)
NOTE: If you use HDMI to connect to the monitor, you must activate HDMI sound by adjusting the
setting in Microsoft Windows. Refer to instructions in the previous section,
Connecting the HDMI
Cable on page 7 in this chapter.
ENWW Connecting External Speakers and Audio Cable (not provided) 15