HP (Hewlett-Packard) 2524 Switch User Manual


  Open as PDF
of 6
 
CONFIGURATION COMMANDS: (created on software version F.01.07)
CONFIGURATION COMMANDS: (created on software version F.01.07)CONFIGURATION COMMANDS: (created on software version F.01.07)
Switch A
Switch ASwitch A
CONFIGURATION COMMANDS: (created on software version F.01.07)
CONFIGURATION COMMANDS: (created on software version F.01.07)CONFIGURATION COMMANDS: (created on software version F.01.07)
Switch B
Switch BSwitch B
RESULTING CONFIGURATION:
RESULTING CONFIGURATION:RESULTING CONFIGURATION:
Switch A
Switch ASwitch A
CONFIGURATION COMMANDS: (created on software version F.01.07)
Switch A
HP ProCurve Switch 2524# erase start
Configuration will be deleted and device rebooted, continue [y/n]? y
HP ProCurve Switch 2524# config t
HP ProCurve Switch 2524(config)# hostname Switch_A
Switch_A(config)# int e 1-2,5-6,13,17 lacp active
Switch_A(config)# wr mem
Switch_A(config)# end
CONFIGURATION COMMANDS: (created on software version F.01.07)
Switch B
None. This switch is left in default configuration (LACP passive on all ports).
RESULTING CONFIGURATION:
Switch A
Switch_A# sh config
IN-FLASH CONFIGURATION
; J4813A Configuration Editor; Created on release #F.01.07
time daylight-time-rule None
hostname "Switch_A"
interface 1
lacp Active
exit
interface 2
lacp Active
exit
interface 5
lacp Active
exit
interface 6
lacp Active
exit
interface 13
lacp Active
exit
interface 17
lacp Active
exit
ip timep dhcp
snmp-server community "public" Unrestricted
vlan 1
name "DEFAULT_VLAN"
untagged 1-26,Dyn1
ip address dhcp-bootp
exit
©Copyright Hewlett-Packard Company, 2000.
All rights reserved.
Page 3
 previous next