Filter
Top Products
RESULTING CONFIGURATION:
RESULTING CONFIGURATION:RESULTING CONFIGURATION:
Switch B
Switch B Switch B
VERIFICATION COMMANDS:
VERIFICATION COMMANDS:VERIFICATION COMMANDS:
show lacp
show lacpshow lacp
show log lacp
show log lacpshow log lacp
---- ------- ------- ------- ------- -------
RESULTING CONFIGURATION:
Switch B (Default configuration.)
HP ProCurve Switch 2524# sh config
IN-FLASH CONFIGURATION
; J4813A Configuration Editor; Created on release #F.01.07
time daylight-time-rule None
hostname "HP ProCurve Switch 2524"
ip timep dhcp
snmp-server community "public" Unrestricted
vlan 1
name "DEFAULT_VLAN"
untagged 1-26,Dyn1
ip address dhcp-bootp
exit
VERIFICATION COMMANDS:
The following CLI commands can be used to display LACP information:
• show lacp
• show log lacp
Switch_A# sh lacp
PORT LACP
NUMB ENABLED
1 Active
2 Active
3 Passive
4 Passive
5 Active
6 Active
7 Passive
8 Passive
9 Passive
10 Passive
11 Passive
12 Passive
13 Active
14 Passive
15 Passive
16 Passive
17 Active
18 Passive
19 Passive
20 Passive
21 Passive
22 Passive
23 Passive
24 Passive
25 Passive
26 Passive
LACP
TRUNK PORT LACP LACP
GROUP STATUS PARTNER STATUS
Dyn1 Up Yes Success
Dyn1 Up Yes Success
3 Down No Success
4 Down No Success
Dyn1 Up Yes Success
Dyn1 Up Yes Success
7 Down No Success
8 Down No Success
9 Down No Success
10 Down No Success
11 Down No Success
12 Down No Success
Dyn1 Standby Yes Success
14 Down No Success
15 Down No Success
16 Down No Success
Dyn1 Standby Yes Success
18 Down No Success
19 Down No Success
20 Down No Success
21 Down No Success
22 Down No Success
23 Down No Success
24 Down No Success
25 Down No Success
26 Down No Success
©Copyright Hewlett-Packard Company, 2000. Page 4
All rights reserved.