HP (Hewlett-Packard) 2650 Switch User Manual


 
Monitoring and Analyzing Switch Operation
Status and Counters Data
VLAN Information
The switch uses the CLI to display the following VLAN status:
Syntax:
show vlan
Lists:
Maximum number of VLANs to support
Existing VLANs
Status (static or dynamic)
Primary VLAN
Syntax:
show vlan < vlan-id >
For the specified VLAN, lists:
Name, VID, and status (static/dynamic)
Per-Port mode (tagged, untagged, forbid, no/
auto)
“Unknown VLAN” setting (Learn, Block, Disable)
Port status (up/down)
For example, suppose that your switch has the following VLANs:
Ports VLAN VID
1 - 12 DEFAULT_VLAN 1
1, 2 VLAN-33 33
3, 4 VLAN-44 44
The next three figures show how you could list data on the above VLANs.
B-21