HP (Hewlett-Packard) 2740P Laptop User Manual


 
10 Memory modules
The computer has one memory module compartment, which is located on the bottom of the
computer.
The memory capacity of the computer can be upgraded by adding a memory module to the vacant
expansion memory module slot or by upgrading the existing memory module in the primary memory
module slot.
WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power
cord and remove all batteries before installing a memory module.
CAUTION: Electrostatic discharge (ESD) can damage electronic components. Before beginning
any procedure, touch a grounded metal object to be sure that you are discharged of static electricity.
Adding or replacing a memory module
To add or replace a memory module in the memory module slot, follow these steps:
1. Save your work.
2. Shut down the computer.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by sliding
the power switch to the right. Then shut down the computer through the operating system.
3. Disconnect all external devices connected to the computer.
4. Unplug the power cord from the AC outlet.
5. Turn the computer upside down on a flat surface.
6. Remove all batteries from the computer.
7. Loosen the 3 hard drive compartment cover screws (1).
Adding or replacing a memory module 107