Filter
Top Products
Task 1: Removing the Modular Smart Array 500 Controller
(See Figure 3)
1. Press the controller’s thumb latch, and pull the latch handle toward you X.
2. Remove the Modular Smart Array 500 Controller by pulling it straight out of the chassis Y.
Figure 3. Removing the Modular Smart Array 500 Controller
1
2
1
2
Task 2: Inserting the Modular Smart Array1000 Controller
(See Figure 4)
1. Insert the Modular Smart Array 1000 Controller into the chassis X.
2. Push the controller in as far as it will go, and press the latch inwards until it is flush against the
front panel Y.
Figure 4. Installing the Modular Smart Array1000 Controller