Filter
Top Products
2-12
Installation and Configuration
out. Either change the value in the “Enter new value” dialog box or enter a new
parameter number into the Parameter number dialog box.
4. Click on the Apply button to set the HP OfficeJet with the new parameter value.
If you want to change another parameter, repeat step 1.
Because there is no minimize button, use the alt and tab keys to hide or show the HP OfficeJet Service Application
window if another application has covered the Service Application window.
Exiting the Service Application
Whenever exiting the Service Application Program, allow 5 to 10 seconds for the hardware to
terminate the factory and service capability.
To exit or quit the program, click on the Exit button. After depressing the Exit button, be sure to wait 5 to 10 seconds
for the hardware to terminate the factory and service capability before taking any other action. During the transition
observe the OfficeJet front panel LCD display for the following events:
D The phrase “Enter header number” appears on the top line of the HP OfficeJet LCD display.
D A string of characters appear on the bottom line of the HP OfficeJet LCD display.
D The HP OfficeJet LCD display blanks out briefly and returns to the normal “ready” state
Printing a Parameter Report
Clicking on the “Report tab in the service application main menu causes the window to appear as follows:
To print a parameter report, click on the Print parameter report button.
Note: There is a 5 second delay before printing begins.
C A U T I O N