Filter
Top Products
2-17
Installation and Configuration
Installing a Print Cartridge
2
SL42
1
SL18A
With the control panel and top cover open, locate
the print cartridge cradle inside the HP OfficeJet
Series 300, near on the right side.
SL43
34
Open the print cartridge box and container, then
grasp the print cartridge by the green top and remove
the cartridge from the container. Gently remove both
pieces of tape – blue and white – covering the ink
nozzles and vent hole.
CAUTIONS: 1) If the user doesn’t remove the white
tape, the cartridge will prematurely fail.
2) Be careful not to touch the ink nozzles or the
copper contacts. Fingerprints may damage them.
Place the print cartridge down into the cradle as
shown. Align the green arrow on the cartridge
top with the green dot on top of the cradle.
Remove both pieces of tape!
Push the green arrow toward the green dot until
the cartridge snaps into place.
Close the top cover, then close the control panel.
5 Helpful Hint:
Be sure to close the control panel firmly, until it
snaps into place.
SL16SL42A
Print cartridge cradle