Filter
Top Products
2-16
Installation and Configuration
Installing Control Panel and One-Touch Overlays
Each HP OfficeJet Series 300 is shipped with a control panel overlay appropriate for the country of destination
installed. The overlay has the HP logo and HP Model 300, Model 330, or Model 350 name as well as the control panel
button names printed on it. If an overlay needs to be installed, remove the protective cover from the back of the overlay
and carefully position the overlay on the control panel. Then press the overlay into place and remove the protective
cover from the top of the overlay. The illustration below shows the overlay in place with the protective cover being
removed.
Removing the Protective Cover from the Top of the Control Panel Overlay
One-Touch Speed Dial
SL50A
Each HP OfficeJet Series 300 is shipped with a One-Touch speed dial overlay and clear plastic protective cover for the
overlay installed. If a new overlay and protective cover need to be installed, position the overlay and cover over the
one-touch buttons as shown below. Press the overlay into place. Then place the protective cover over the overlay.
Insure that the tabs on the protective cover are properly seated.
Placing the OneĆTouch Speed Dial Overlay and Protective Cover Over the OneĆTouch Panel
Overlay
Protective
Cover
Tab
One-Touch Buttons
FX-75