Filter
Top Products
2-35
Installation and Configuration
Entering the Header Information (company name and fax number)
Sender Identification and fax number entries are required on all outgoing faxes. This information will appear in the
header of transactions for reference. The header information in an HP OfficeJet Series 300 is set during installation of
the software, but can be changed using the HP OfficeJet Series 300 Manager software by selecting the Send Fax Setup
dialog box and entering the information as described in the HP OfficeJet Series 300 User’s Guide.
The header information can also be changed using the front panel menu. The procedures to change the header
information using the front panel is shown on the next page of this guide.
Note: The Telephone Protection Act of 1991 requires that all faxes transmitted in the
U.S.A. display the sender’s identifying name and fax number in a header, footer or
cover page. Most applications contain the information in the document header.
Use the procedure on the next page to enter header information using the front panel.