HP (Hewlett-Packard) 300 All in One Printer User Manual


 
Product Information1-12
Colored bond and photocopy paper (such as pink, yellow, or blue) can be used, as long as it meets these specifications:
D Paper Size U.S. letter 8 1/2 in x 11 in, (216 x 279 mm)
U.S. legal 8 1/2 in x 14 in, (215 x 356 mm)
Executive 7.25 x 10.5 in, (184 mm x 267 mm)
A4 metric 8.27 x 11.7 in, (210 mm x 297 mm)
D Envelope Size U.S. No. 10 4.12 x 9.5 in, (105 x 241 mm)
European DL 8.66 x 4.33 in, (220 x 110 mm)
D Paper Type Cut sheet
D Cut Edge Conditions Sharp blade cut, with no visible fray
D Finishing Dimensions ± 0.0313 inch of nominal, corners 90_± 0.20_
D Paper Grain Long grain
D Moisture Content 4% to 6% by weight
D Opacity 84% minimum
D Packaging Polylaminated moisture-proof ream wrap
D Paper weight 60 to 135 g/m
2
(
16 lb to 36 lb), 75 g/m
2
(
20 lb) recommended
D Wax Pick 2 inch minimum (Dennison)
When loading paper, observe the following precautions:
D Handle all paper by the edges only
D Load all paper types the same way
D Use only one paper type in the printer’s paper tray at a time
D Always load paper print side up in the media tray
Plain paper has a print side which is not visible to the naked eye, so before removing paper from its package for use in
the printer, check the outside package label. Always load the paper into the machine with the print side facing down.
The print side will be indicated by an arrow or other symbol on the label.
Avoid the following types of media:
D Paper greater than 135 g/m
2
(36 lb) or less than 60 g/m
2
(16 lb)
D Paper with cutouts or perforations
D Multiple part forms
D Carbon copy forms
D Paper sizes other than those listed in this document