Filter
Top Products
5-94
Problem Resolution
Parameter # Description Units
167 SW scaling switching threshold in photo. For factory use only.
Default value = 999.
N/A
168 Solo/SoloLite demo page. Determines whether a Model 330 or a Model 300 demo
page will be produced on demand.
Default = 0
0 = FALSE
1 = TRUE
169 PCL normal/condensed font.
Default = 0
0 = Normal
1 =
Condensed
170 Fax download timeout.
Default = 10 s
1 to 1000 s
171 Fax upload timeout.
Default = 20 s
1 to 1000 s
172 Scan upload timeout.
Default = 20 s
1 to 1000 s
173 Upload format version number. N/A
No. form =
0x0101
175 System failure code location. Parameter address location where the system error
codes are stored. Always 176.
176
176, 177,
178, 179
System failure code 1,2,3,4. Storage locations of the last four system error code
failures.
N/A
200 Scanner jam to window steps. Value used to adjust for the tolerance between the
scanner location and the top of page sensor. This value will adjust the top margin
when faxing or copying and is set as part of the Scanner Calibration procedure.
N/A
201 Scanner gain. Calculated automatically each time the HP OfficeJet Series 300 is
power ON.
N/A
226 Total pages received. Counter which keeps track of how many fax pages were
received by HP OfficeJet Series 300. Each fax page received increments the counter
by one.
N/A
227 Total pages sent. Counter which keeps track of how many fax pages were sent by
HP OfficeJet Series 300. Each fax page sent increments the counter by one.
N/A
228 Total pages copied. Counter which keeps track of how many pages were copied
and how many copies of each page were made. Each printed copy increments the
counter by one.
N/A
229 Total pages printed. Counter which keeps track of number of all pages printed
from all HP OfficeJet Series 300 functions including printed faxes, printed copies
and printing (as a printer).
N/A