Filter
Top Products
5-50
Problem Resolution
HP OfficeJet Series 300 Parameter Descriptions
The parameter database is initialized from internal tables based on the LIU country code and revision. Many of these
parameters are modifiable by the user or support person and are not initialized whenever the unit is powered ON.
Changes made will normally be retained. Parameter values will initialize to default values under the following
circumstances:
D First startup at factory
D Startup after battery failure
D Factory (or full) reset
D LIU replacement
Refer to the following parameter listing for a description and value(s) for each parameter number. The units describe
the range of selection (in parenthesis) and incremental units for that range. Default values for various countries are
specified in the listing. Parameters shown with an “*” are affected by the User menu.
LIU (Line Interface Unit) Identification
Parameter # Description Units
1 LIU ID interface code. Code displayed depends on the country LIU installed
Code
Country
15 United States
23 Australia
47 France
39 Germany
35 Netherlands
31 United Kingdom
25 India
4 Korea
6 China
N/A
2 LIU Revision code. Also depends on the LIU installed. Values of 0 through 3 are
supported. For example: Default = 0 (=rev. 0)
Country Default
United States 0
Australia 0
France 0
Germany 0
Netherlands 0
United Kingdom 0
India 0
Korea 0
China 1
0–3