Filter
Top Products
Configuring HP ProLiant systems with Windows PE 13
:NEXT5
%Tools%\System\ifhw .\hwdisc.xml %Tools%\System\allboards.xml PCI:"HP 6 Port
SATA RAID Controller"
if errorlevel 1 GOTO NEXT6
.\Adaptec\bin\arcconf.exe ***Fill in command options***
:NEXT6
pause
REM========================================================================
REM *** Configure the iLO if iLo Present
REM *** echo configuring iLO is present
REM========================================================================
rem %Tools%\System\ifhw .\hwdisc.xml %Tools%\System\allboards.xml
PCI:"Integrated Lights-Out Controller"
rem if errorlevel 1 GOTO State2
rem .\iLo\hponcfg -f %GlobalData%\iLoSettings\iloconfig.xml
REM========================================================================
echo Setting State Information... Due to Problems with diskpart not picking
up new logical volumes
REM========================================================================
%Tools%\System\statemgr /w Phase 2
REM *** REBOOT if necessary
%Tools%\System\reboot PXE
:State2
REM========================================================================
REM *** Create partition by reading content of the script file and
REM *** stamping the configuration onto the hard drive in the target server
REM========================================================================
echo Creating Disk Partition...
%MsTools%\DiskPart /s %GlobalData%\diskPart0.txt
echo Formatting Disk Partition...
%MsTools%\format c: /FS:NTFS /Q /y
pause
%Tools%\System\statemgr /w Phase 3
echo Creating Driver Directory and Copying Drivers...
mkdir c:\ntcsp
rem xcopy %HPQFlatFiles%\$oem$ c:\$oem$ /s /e
xcopy %HPQComponents% c:\ntcsp /s /e
pause
REM *** Copy the customized UNATTEND.TXT file from the system
REM *** configuration area to the root directory of the target server's
REM *** hard drive
:State3
copy %GlobalData%\unattend.txt c:\
REM========================================================================