Filter
Top Products
5
Configuring the HP 37717C
communications performance analyzer
There are reserved slots for optical interfacing and remote-control
modules. In addition, you have a maximum of eight user-
configurable slots to add PDH/DSn, SONET/SDH, ATM and jitter
capability. Ensure that the number of slots used does not exceed
eight.
Step 1 Review sections 1 to 12 in the following pages to determine the
capability you require. In each section, select one option as required
and tick the option box.
Step 3 Check that you have specified both test and interfacing for all
required capabilities.
Your local HP sales representative will be happy to help you
configure the HP 37717C analyzer to match your specific needs.
Remote
2
Optical
1345678
Step 2 Enter the option code and slots used in the table below. Confirm
slots used does not exceed eight slots.
Option No. of Slots
code slots used
1. PDH/DSn and ATM test 2
and interfaces option
2. SONET/SDH test and interfaces option 2
3. Wander and jitter generation option 1
4. Wander and jitter measurement option 1 or 2
5. ATM services layer test option 1 or 2
6. PDH binary interfaces option 1
7. Optical interfaces option
— Reserved
8. SONET/SDH binary interfaces option 1
9. Multiple PDH interfaces option 1
10. Remote-control/external-printer
—
Reserved
interfaces option
11. Printer option — —
12. Optical adaptor options — —
Total number of slots used