Filter
Top Products
13 Installing the 3COM Etherlink III 3C590 PCI 10BT Network Adapter
Microsoft Windows for Workgroups 3.11
13 Installing the 3COM Etherlink III 3C590 PCI 10BT
Network Adapter
Microsoft Windows for
Workgroups 3.11
Connecting to a Novell
NetWare 4.11 Server
Requirements
• HP Vectra with DOS and MS-Windows for Workgroups 3.11.
• 3COM Etherlink III 3C590 PCI 10BT network adapter and driver disk ver-
sion 5.2.2.
• Driver File: EL59X.386, version 1.18
• Microsoft Windows for Workgroups 3.11 media.
• Novell NetWare 4.11 Server system that supports IPX network protocol.
• NetWare Client for DOS and MS Windows v1.21 installation media.
Device Configuration
Procedure
1 With the HP Vectra turned off, install the 3COM 3C590 network adapter
into a PCI slot.
2 Connect network cable media to the 3COM 3C590 network adapter.
3 From the location of the “NetWare Client for DOS and Windows v1.21”
installation files, execute “Install.exe”.
4 Select option 5 “Select the driver for your network board” and press
“Enter”.
5 Select “OTHER DRIVERS”from the Network Board selection.
6 Insert the 3COM 3C590 driver disk into the floppy drive.
7 Type the path “A:\NETWARE\CLIENT” when prompted and press
“Enter”.
8 Select “3Com Fast EtherLink/EtherLink III Bus Master Family” and hit
“Enter”.
Device Configuration Vectra Vli8 Vectra VEi7 Vectra VEi8
Interrupt 05 05 05
I/O Address 210 300 300