Filter
Top Products
HP 10/100 3Com 3C905B-TX Network Interface Card Installation Guide
Overview of the Installation Procedure
6 English
Non-Supported Network Drivers
The following network drivers are provided on the
EtherDisk
diskettes
but not supported by Hewlett-Packard:
Overview of the Installation Procedure
CAUTION Your PC and network interface card can be permanently damaged by
static electricity. Before handling the card, touch the unpainted part of
your PC’s metal chassis. Maintain grounding by wearing a wrist strap
attached to the chassis. Handle the card by its backplate and top edge.
Do not touch the edge connector.
Installing the 3C905B-TX NIC is a 4-step process. You need to:
1
Install the card in your PC.
2
Connect the card to the network.
3
Update LAN-specific fields in the HP PC Setup utility.
4
Install the driver software.
Network Operating
System
README (for driver
installation)
Network Driver Name
Netware 4.1 Server NETWARE.41X 3C90X.LAN
Banyan VINES BANYAN.TXT EL90X.DOS
Artisoft LANtastic LANTASTK.TXT EL90X.DOS
IBM LAN SERVER (DOS) LANSRVR.TXT EL90X.DOS
IBM LAN SERVER (OS/2) LANSRVR.TXT EL90X.OS2
DEC PATHWORKS PATHWORK.TXT EL90X.DOS (DOS) and
3C90X.COM (Netware)
3com.bk : 3com-us.fb4 Page 6 Thursday, June 18, 1998 4:17 PM