Filter
Top Products
HP 10/100 3Com 3C905B-TX Network Interface Card Installation Guide
Software Installation Procedure
12 English
Installing the Driver
Follow these steps to install the network driver in a PC running
Windows NT version 4.0:
1 Restart the PC and start Windows NT.
2 In the
Control Panel
, double-click on
Network
.
3 In the
Network
window, click on the
Add...
button.
4 In the
Select Network Component Type
window, select the Adapter
item
and then click on the
Add...
button.
5 In the
Select Network adapters
window, click on the
Have Disk...
button.
6 Insert EtherDisk diskette #2 in drive A, and in the
Insert Disk
window,
click on OK.
7 In the Select OEM Option box, select 3Com EtherLink Adapter
(3C905B).
8 Click on OK.
9 Select the
Protocol
tab.
10 Select the appropriate protocol for your network and click on OK.
11 Close the
Network
window.
If you are prompted for network information, enter the information
supplied by your MIS department.
Windows NT prompts you to reboot.
12 Click on Yes to restart your PC.
The driver installation is complete.
To confirm successful installation, double-click on the
Network
icon in
the
Control Panel
. Double click on the Adapter item. 3Com
EtherLink XL Adapter should appear in the Network
Adapters list.
3com.bk : 3com-us.fb4 Page 12 Thursday, June 18, 1998 4:17 PM