●
WLAN module see (
WLAN module on page 43).
● Hard drive (see
Hard drive on page 37).
●
USB/Audio (see USB/Audio)
●
Display panel cable (see
Display panel on page 31).
Remove the system board:
1. Remove the following cables:
●
Power connector cable (1)
●
Speaker cable (2)
● Subwoofer cable (3)
●
USB/Audio board cable (4)
●
Keyboard cable (5)
●
Keyboard light cable (6)
●
TouchPad board cable (7)
●
Wireless cable (8)
●
Display panel cable (9)
●
Power button board cable (10)
2. Remove the 4 Phillips PM 2.5x3 screws (1) until the system board rests at an angle.
Component replacement procedures 49