Filter
Top Products
4. Remove the 1 Phillips PM 2.5x3 screw securing the keyboard to the bracket (1), disconnect the
keyboard cable (2) (pushing it through the bracket), and then remove the keyboard from the
bracket (3).
Reverse this procedure to install the keyboard.
Top cover
Description Spare part number
Top cover 686093–001
690194–001
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the display panel (see
Display panel on page 31).
5. Remove the base enclosure (see
Base enclosure on page 33).
6. Disconnect the battery cable (see
Battery on page 35.
Remove the top cover:
1. Turn the computer right-side up, with the front toward you.
2. Open the computer.
Component replacement procedures 63