Filter
Top Products
Frequently asked questions 94
If the activity indicator light is not on, ask the customer to be sure the power source is valid, the
power button is on, and the cables are connected properly.
3. After the activity indicator light is on, which means the console switch is operational, ask the
customer to press the Prnt Scrn key on the keyboard attached to the monitor that is connected to the
console switch (local port). The Main menu appears and if no servers are connected, the screen is
blank.
What are the minimum and maximum cable lengths?
Refer to "Connection length table (on page 90)."
What kind of CAT5 cables are supported?
Only UTP CAT5, CAT6, and CAT7 cables are supported.