Filter
Top Products
Command line 18
Item Description
Syntax
set fc-connection <ProfileName> <Port>
[Fabric=<FabricName>] [Speed=<Auto|2Gb|4Gb|Disabled>]
[BootPriority=<priority>] [BootPort=<portName>]
[BootLun=<LUN>]
Parameters:
ProfileName
The name of the server profile that contains the connection to modify
Port
The port number of the connection being modified
Properties:
Fabric
The name of the FC SAN fabric to associate with the connection
Speed
The port speed of the FC SAN connection. Valid values include Auto, 4Gb,
2Gb, and Disabled
BootPriority
Controls whether the FC HBA port is enabled for SAN boot and will affect the
BIOS boot order. Valid values include BIOS, Primary, Secondary, Disabled
BootPort
The target WWPN of the controller interface on the Fibre Channel storage
target. The port name is a 64-bit identifier in the format:
NN:NN:NN:NN:NN:NN:NN:NN, where N is a hexadecimal number
BootLun
The LUN of the volume used for SAN boot. Valid values include an integer
from 0-255.
Examples:
->set fc-connection MyProfile 1 Fabric=SAN_5
Changes the fabric of an FC SAN fabric connection
->set fc-connection RedProfile 2 Fabric=""
Sets a FC SAN fabric connection to "Unassigned"
->set fc-connection BlueProfile 1 Fabric=SAN_7
Changes the FC SAN Fabric of an FC SAN connection
->set fc-connection BlueProfile 1 Speed=4Gb
Changes the port speed of a FC SAN connection
->set fc-connection BlueProfile 1 BootPriority=Primary
BootPort=50:06:0B:00:00:C2:62:00 BootLun=5
Changes the SAN boot priority and sets additional boot parameters
firmware
Display or update Virtual Connection firmware version.
Support actions: help, show, update
Item Description
show firmware
Display current version of firmware of all interconnect modules in the domain
Syntax
show firmware
Examples:
->show firmware
Displays current version of the firmware