Filter
Top Products
Configuring the Virtual Connect domain using the CLI 51
Operation Examples
Display stacking link configuration and status
>show stackinglink
Display the system log
>show systemlog
Display a list of servers in the domain
• Summary display
>show server
• Detailed display
>show server *
• Single server display
>show server enc0:1
>show server 2
Display server profiles
• Summary display
>show profile
• Detailed display
>show profile *
• Single profile display
>show profile MyProfile
Delete the domain configuration
>delete domain
Update interconnect module firmware
>update firmware
url=http://www.mywebserver.com/images/vc-
1.20.rom
Force a failover to the standby VC Manager
>reset vcm - failover
Power off server blades
>poweroff server enc0:2
>poweroff server 3
>poweroff server *
Power on server blades
>poweron server enc0:1
>poweron server 2
>poweron server *
Reset a server blade
>reboot server enc0:4
>reboot server 6
>reboot server *
Unassign a server profile from a device bay
>unassign profile MyProfile
Modify Ethernet network connection properties
>set enet-connection MyProfile 1
pxe=disabled
Modify FC fabric connections
>set fc-connection MyProfile 2 speed=auto
Resetting the Virtual Connect Manager
To reset the Virtual Connect Manager, use the reset vcm command:
>reset vcm
>reset vcm [-failover]
Administrator privileges are required for this operation.
If VC Ethernet Modules are installed in I/O bays 1 and 2 of the enclosure, the user can manually change
which Virtual Connect Ethernet Module is hosting the Virtual Connect Manager through the use of this
feature. The feature can also force the Virtual Connect manager to restart without switching to the