HP (Hewlett-Packard) 4530S Laptop User Manual


 
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 47).
5. Remove the following components:
a. Bottom door (see
Bottom door on page 49).
b. Hard drive (see
Hard drive on page 52)
c. Optical drive (see
Optical drive on page 50)
d. Modem module (see
Modem module on page 76)
e. Keyboard (see
Keyboard on page 63)
f. Top cover (see
Top cover on page 65)
When replacing the system board, be sure to remove the following components from the defective
system board and install on the replacement system board:
SIM (see
SIM on page 48)
Memory module (see
Memory modules on page 54)
WLAN module (see
WLAN/Bluetooth combo card on page 58)
WWAN module (see
WWAN module on page 56)
Modem module (see
Modem module on page 76)
Processor (see
Processor on page 97)
Remove the system board:
1. Position the computer upright with the front toward you.
86 Chapter 4 Removal and replacement procedures