Filter
Top Products
IU 678 / 0225 4 TowerFeed
TM
for the HP Color LaserJet 4550
UNPACKING
Note:
Prior to delivery, your TowerFeed was thoroughly tested and carefully packaged.
Please check your unit for transportation damage and/or missing parts immediately upon receipt.
It is advisable to get a second person to help you unpack the unit.
Warning:
TowerFeed may weigh up to 50 kilograms (115 pounds) depending on configuration.
To prevent back strain or injury, bend your knees when lifting the unit, and get help if you need
To unpack the TowerFeed unit, proceed as follows:
• Cut the packing strips and remove the top of the shipping container (Fig. 1).
• Remove the accessories box. It contains the rollers, the power and data cable, one diskette and this User's
Manual (Fig. 7).
• Remove the blue shock absorbers from the upper edges of TowerFeed.
• Lay the unit on its side and carefully pull off the lower part of the shipping container (Fig. 2), or enlist the help
of another person to lift TowerFeed out of the container.
Caution:
Do not lift TowerFeed on the top profiles to prevent it from damage!
• Insert the rollers from the accessories box with some force onto the shafts on the TowerFeed bottom plate
until they snap into position with an audible click (Fig. 3).
• Stand up the TowerFeed unit (Fig. 4).
• Remove the plastic from TowerFeed.
Warning:
For reshipping TowerFeed you must use the original packing to avoid shipping damage of the unit.
Re-packing (Fig. 5)
It is recommended that you keep the packaging material and inserts for proper protection of the unit and its parts in
case of reshipment.
To repack TowerFeed, follow the above steps in reverse. Pull-off rollers from the unit and put it into the accessories
box including manuals and cables. Remove the trays and insert the transportation inserts as shown in Fig. 8 (It is
important to secure the trays to avoid possible shipping damage). Place items according to Fig. 5. Ensure that
TowerFeed is correctly seated and cushioned. Insert the blue shock absorbers on the top and close the container.