Filter
Top Products
5-16
IPv6 Management Features
TFTP File Transfers Over IPv6
Enabling TFTP for IPv6
TFTP for IPv6 is enabled by default on the switch. However, if it is disabled,
you can re-enable it by specifying TFTP client or server functionality with the
tftp6 <client | server> command. Enter the tftp6 <client | server> command at
the global configuration level.
Usage Notes To disable all TFTP client or server operation on the switch except for the
auto-TFTP feature, enter the no tftp6 <client | server> command. To re-enable
TFTP client or server operation, re-enter the tftp6 <client | server> command.
When TFTP is disabled, instances of TFTP in the CLI copy command and the
Menu interface “Download OS” screen become unavailable.
The no tftp6 <client | server> command does not disable auto-TFTP operation.
For more information, see “Using Auto-TFTP for IPv6” on page 5-19.
Syntax:
tftp6 <client | server>
Enables TFTP for IPv6 client or server functionality so that the
switch can:
• Use TFTP client functionality to access IPv6-based TFTP
servers in the network to receive downloaded files.
• Use TFTP server functionality to be accessed by other IPv6
hosts to upload files to an IPv6 host.