Filter
Top Products
4-25
IPv6 Addressing Configuration
View the Current IPv6 Addressing Configuration
Figure 4-2. Example of Show IPv6 VLAN < vid > Output
ProCurve(config)# show ipv6 vlan 10
Internet (IPv6) Service
IPv6 Routing : Disabled
Default Gateway : 10.0.9.80
ND DAD : Enabled
DAD Attempts : 3
Vlan Name : VLAN10
IPv6 Status : Enabled
IPv6 Address/Prefixlength Expiry
------------------------------------------- -------------------------
2620:0:a03:e102::127/64 Wed Jan 23 14:16:17 2008
2620:0:a03:e102:212:79ff:fe88:a100/64 Sat Jan 5 05:02:22 2008
fe80::127/64 permanent
Syntax: show run
In addition to the other elements of the current configuration,
this command lists the statically configured, global unicast
and anycast IPv6 addressing, and the current IPv6 configura-
tion per-VLAN. The listing may include one or more of the
following, depending on what other IPv6 options are config-
ured on the VLAN. Any stateless address autoconfiguration
(SLAAC) commands in the configuration are also listed in the
output, but the actual addresses resulting from these
commands are not included in the output.
■ ipv6 enable
■ ipv6 address fe80::< device-id > link-local
■ ipv6 address < prefix >:< device-id >/< prefix-length >
■ ipv6 address autoconfig
■ ipv6 address dhcp full [rapid-commit]
■ ipv6 < global-unicast-address >/< prefix > anycast