Filter
Top Products
Operating Temperature
(System Inlet Air
Temperature)
50° to 95° F (10° to 35° C)
HP 300GB 6G SAS 15K rpm
LFF (3.5-inch) Dual Port
Enterprise 3yr Warranty
Hard Drive
516814-B21
Capacity
300,000,000,000
Height
1.04 in (26.4 mm)
Width
4.36 in (110.7 mm)
Depth
7.43 in (188.7 mm)
Interface
SAS
Transfer Rate
Synchronous
(Maximum)
6 Gb/sec
Seek Time
(typical reads, including
settling)
Single Track
0.2ms
Average
3.5ms
Full-Stroke
6.8ms
Rotational Speed
15,000rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
585,937,500
Operating Temperature
(System Inlet Air
Temperature)
50° to 95° F (10° to 35° C)
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
Application
SAS Midline drives are intended for servers and storage solutions where high capacities are required.
These drives have moderately-priced reliability and performance for non-mission critical, low workload
applications, such as disk backup, archival, and reference applications.
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
QuickSpecs
HP SAS Hard Drives
Technical Specifications
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 22