Filter
Top Products
SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
Application
SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work
load intensive applications where 24/7 duty cycles are a requirement, such as database applications and
high transaction level applications.
Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated
down to an acceptable level for all components.
HP 600GB 6G SAS 15K rpm
LFF (3.5-inch) Non-hot
Plug Dual Port Enterprise
3yr Warranty Hard Drive
516830-B21
Capacity
600,127,266,816
Height
1.028 in (26.1 mm)
Width
4.0 in (101.6 mm)
Depth
5.787 in (147.0 mm)
Interface
SAS
Transfer Rate
Synchronous
(Maximum)
6Gb/sec
Seek Time
(typical reads, including
settling)
Single Track
0.2ms
Average
3.5ms
Full-Stroke
6.8ms
Rotational Speed
15,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
1,172,123,568
Operating Temperature
(System Inlet Air
Temperature)
50° to 95° F (10° to 35° C)
HP 450GB 6G SAS 15K rpm
LFF (3.5-inch) Non-hot
Plug Dual Port Enterprise
3yr Warranty Hard Drive
516826-B21
Capacity
450,098,159,616
Height
1.028 in (26.1 mm)
Width
4.0 in (101.6 mm)
Depth
5.787 in (147.0 mm)
Interface
SAS
Transfer Rate
Synchronous
(Maximum)
6Gb/sec
Seek Time
(typical reads, including
settling)
Single Track
0.2ms
Average
3.5ms
Full-Stroke
6.8ms
Rotational Speed
15,000 rpm
Physical Configuration
Bytes/Sector
512
Logical Blocks
879,097,968
QuickSpecs
HP SAS Hard Drives
Technical Specifications
DA - 12244 Worldwide — Version 44 — December 9, 2013
Page 28