HP (Hewlett-Packard) 6530b Laptop User Manual


 
800 MHz DDR2 SDRAM
Two DIMM slots supporting dual-channel memory
DIMM sizes supported: 1024 MB, 2048 MB, and 4096 MB
Standard Memory
1024 MB (1024 MB x 1)
2048 MB (2048 MB x 1 or 1024 MB x 2)
3072 MB (2048 MB 1024 MB)
4096 MB (2048 MB x 2)
Optional Memory
Upgrades
Support for up to 8192 MB of memory with the installation of optional DDR2 SDRAM memory kits.
Both memory slots are user-accessible. Please refer to the Hardware and Software Guide for
installation procedures. Maximized dual-channel performance requires SODIMMs of the same size
and speed in both memory slots.
Up to
Slot 1 Slot 2
1024 MB 1024 MB
Empty
2048 MB 2048 MB
Empty
2048 MB 1024 MB 1024 MB
3072 MB 2048 MB 1024 MB
4096 MB 2048 MB 2048 MB
8192 MB 4096 MB 4096 MB
NOTE:
This chart does not represent all possible memory configurations. Due to the non-industry
standard nature of some third-party memory modules, we strongly recommend using only HP-
branded memory modules to ensure compatibility. If you mix memory speeds, the system will
perform at the lower memory speed. Full availability of 4 GB or more of memory requires Windows
Vista Business 64-bit or Linux. With Windows 32-bit operating systems, the amount of usable
memory is dependent upon your configuration, so that above 3 GB all memory may not be
available due to system resource requirements.
Memory Upgrades
HP 1 GB (DDR2 800 MHz) SODIMM
KT292AA
HP 2 GB (DDR2 800 MHz) SODIMM
KT293AA
HP 4 GB (DDR2 800 MHz) SODIMM
KT294AA
QuickSpecs
HP Compaq 6530b Notebook PC
Memory
DA - 13052 Worldwide QuickSpecs — Version 6 — 9.10.2008
Page 15