HP (Hewlett-Packard) 670632-S21 Server User Manual


 
Expansion Slots Expansion Slots
#
Technology
Bus
Width*
Connector
Width
Form Factor
Notes
1
PCIe 3.0
x8 x8
Low profile slot
Activated when
installed with
processor 1
2
PCIe 3.0
x16 x16
Full-height, half-
length slot
Activated when
installed with
processor 1
*Indicates the number of physical electrical lanes running to the connector.
NOTE:
Two PCIe 3.0 expansion slots: (1) Half-length, full-height slot and (1) low-profile slot.
HP Server ROM
HP ROM (Read Only Memory) is now digitally signed using HP's Corporate Signing Service. This signature is
verified before the flash process starts, reducing accidental programming and preventing malicious efforts
to corrupt system ROM.
HP ROM provides for essential initialization and validation of hardware components before control is
passed to the customer-installed operating system. The ROM also provides the capability of booting from
various fixed media (HDD, CD-ROM) and removable media (USB), to continue operation to the operating
system.
HP ROM performs very early configuration of the video controller, to allow monitoring of initialization
progress via an attached monitor. If configuration or hardware errors are discovered during this early
phase of hardware initialization, suitable messages are now displayed on the connected monitor.
Additionally, these configuration or hardware errors are logged to the Integrated Management Log (IML) to
assist in diagnosis.
HP's ProLiant ROM is used to configure the following:
Processor and chipset status registers
System memory, memory map, and memory initialization
System hardware configuration (Integrated PCI devices and optional PCIe cards).
Customer-specific BIOS configuration (using the HP ROM-Based Setup Utility (RBSU).
NOTE:
For further information, please refer to HP's RBSU (ROM based setup utility) user guide:
www.hp.com/support/rbsu
.
Storage Controller
One of the following
depending on Model
Entry Models
HP Smart Array P420i/ZM (RAID 0/1/1+0)
Base Models
HP Smart Array P420i/1GB with FBWC (RAID 0/1/1+0/5/5+0/6/6+0)
Performance Models
HP Smart Array P420i/2GB with FBWC (RAID 0/1/1+0/5/5+0/6/6+0)
Energy Star Models
One of the following
depending on Model
HP Smart Array P420i/1GB FBWC (RAID 0/1/1+0/5/5+0/6/6+0)
HP Smart Array P420i/ZM (RAID 0/1/1+0)
QuickSpecs
HP ProLiant DL360p Generation 8 (Gen8)
Standard Features
DA - 14211 North America — Version 47 — December 13, 2013
Page 6