Filter
Top Products
Maximum Internal
Storage
Hot Plug SFF SAS
9.6TB
8 x 1.2TB
Hot Plug SFF SATA
8.0TB
8 x 1TB
Hot Plug LFF SAS
16.0TB
4 x 4TB
Hot Plug LFF SATA
16.0TB
4 x 4TB
Hot Plug SFF SAS SSD
6.4TB
8 x 800GB
Hot Plug SFF SATA SSD
6.4TB
8 x 800GB
Hot Plug LFF SATA SSD
3.2TB
4 x 800GB
Non-Hot Plug LFF SATA
12.0 TB
4 x 3TB
Interfaces
Serial
1
Video
1 Rear standard video
HP iLO Remote
Management Network Port
1Gb Dedicated
SD slot
1 Internal
NOTE:
The SD slot is not a hot-pluggable device. Customers should not
attempt to plug an SD card into the SD slot while the server is powered.
USB 2.0 Ports
7 total: 4 rear, 2 front, 1 internal (Optional)
Industry Standard
Compliance
ACPI 2.0b Compliant
PCIe 3.0
PXE Support
WOL Support
USB 2.0 Compliant
Server Power Cords
All Pre-configured Models servers ship with a high voltage server to PDU power cord.
NOTE:
HP ProLiant DL servers no longer ship standard with a 12-foot NEMA 5-15P to C13 power cords
(227099-001) that allow connection to 110V US wall outlets in a home or office. ProLiant DL servers are
primarily connected to PDU's in data center racks so they now ship standard with only a PDU 6-foot C-14
to C13 power cord (142258-001). If a user wishes to power a ProLiant DL server using a110V receptacle
(NEMA-15), the 12-foot NEMA 5-15 to C13 power cord must be ordered separately. See Power Cords
section for Worldwide Power Cord options.
Power Specifications
To review typical system power ratings use the HP Power Advisor which is available via the online tool
located at URL:
www.hp.com/go/proliant-energy-efficient
or
www.hp.com/go/hppoweradvisor
.
NOTE:
Power Specification and Technical Content for supported power supplies can be found at:
http://h18000.www1.hp.com/products/quickspecs/14209_na/14209_na.html
QuickSpecs
HP ProLiant DL320e Generation 8 (Gen8)
Standard Features
DA - 14326 North America — Version 21 — December 13, 2013
Page 5