Filter
Top Products
Chapter 5 Operating the Cisco ICS 7750
Accessing the System
5-14
Cisco ICS 7750 Installation and Configuration Guide
78-14165-03
Step 4 Press Ctrl-backslash (\). A menu similar to the following is displayed:
A. System Alarm Processor
B. MASTER System Processing Engine
C. System Switch Processor
1. Slot 1: Multiservice Route Processor
2. Slot 2: Multiservice Route Processor
3. Slot 3: Multiservice Route Processor
4. Slot 4: Multiservice Route Processor
5. Slot 5: System Processing Engine
6. Slot 6: System Processing Engine
Make a selection to switch:
Step 5 Enter the number or letter that corresponds to the card or slot to which you want
to connect.
You are now connected to the selected card, and you can enter the CLI commands
that are supported on that card.
Best Practices for Using Microsoft SQL Server
ICS System Manager and Cisco CallManager require Microsoft SQL Server.
Caution Because of a known issue with Microsoft SQL Server, if you do not install
Cisco CallManager on the SPE310 running System Manager, you could expose
your network to distributed denial of service (DDoS) attacks. If you do not intend
to install Cisco CallManager on the SPE310 running System Manager, you can
prevent DDoS attacks by completing the workaround that is provided in the
Release Notes for the Cisco ICS 7750 for System Software Release 2.x.x.
Caution Microsoft SQL Server is installed on the SPE310 running System Manager at the
factory. If you are reimaging an SPE310 running System Manager, the Image
Install Tool installs Microsoft SQL Server. For other SPE310s on which you
intend to install Cisco CallManager, Microsoft SQL Server is installed during the
Cisco CallManager installation process.