Filter
Top Products
Chapter 5 Operating the Cisco ICS 7750
Accessing the System
5-4
Cisco ICS 7750 Installation and Configuration Guide
78-14165-03
Accessing ICSConfig
Follow these steps to access ICSConfig.
Note This section describes ICSConfig functionality after initial configuration is
complete. For a description of ICSConfig functionality during initial
configuration, see Chapter 4, “Completing the Cisco ICS 7750 Installation.”
Step 1 On a PC, open Netscape Communicator or Microsoft Internet Explorer.
Step 2 In the Location or Address field, enter the following URL, replacing IP address
with the IP address of the SPE310 running System Manager:
http://IP address/icsconfig
Step 3 Log in as an administrator (user ID administrator), and enter your password (the
default is changeme).
Step 4 Click OK.
The system discovers the cards that are currently installed in the chassis. After the
discovery process is complete, the ICS 7700 System Configuration page displays.
Step 5 Click ICS 7700 System Setup.
Step 6 Make any desired changes to the system parameters, and submit your changes.
It will take up to 20 minutes for the system to process your changes. When the
STATUS LEDs on the SPE310s change to solid green, the submit process is
complete.
Accessing ICS System Manager
You can use ICS System Manager to access, configure, monitor, and manage the
chassis and its cards.