Filter
Top Products
Electrical specifications
sheets Tray 3 = 500 sheets
Optional 500-sheet Tray (Trays 2 and 3)
Optional 2000-sheet Tray (Tray 4)
Optional Envelope Feeder = up to 100 envelopes
Paper Output
Bin Capacity
Standard Output Bin (face down) = 500 sheets
Face Up Bin = 100 sheets
5-bin Mailbox with Stapler and 8-bin Mailbox = up to 250 sheets per bin
7-bin Tabletop Mailbox up to 120 sheets per bin
Minimum Paper
Size
3.9 x 7.5 inches (98 x 191 mm)
Maximum Paper
Size
11.7 x 17.7 inches (297 x 450 mm)
Supported
Paper Weights
Tray 1: 16 to 53-lb (60 to 199 g/m2) Bond; 33 lb to 110 lb. Index (through left
output bin only)
Trays 2, 3, 4, or 5: 16 to 28-lb (60 to 105 g/m2)
Two-sided: 16 to 28-lb bond (60 to 105 g/m2)
Base Memory 16 MB (HP LaserJet 8100 and 8100n printer) SDRAM, 24 MB (HP LaserJet
8100dn printer) or 56 MB (HP LaserJet 8100 MFP) of SDRAM, expandable using
industry standard 100-pin DIMMs (Dual In-Line Memory Modules)
There is a Firmware DIMM that must be installed only in Slot 1 or the printer will
not function.
Memory Enhancement technology (MEt) automatically compresses data to use
RAM more efficiently
Memory
Expansion
The printer has three dual in-line memory module DIMM) slots for upgrading.
There is a Firmware DIMM that must be installed only in Slot 1 or the printer will
not function.
More printer memory. DIMMs are available in 4, 8, 16, 32, and 64 MB, for a
maximum of 192 MB.
Flash memory DIMMs, available in 2 and 4 MB. Unlike standard printer memory,
flash DIMMs can be used to permanently store downloaded items in the printer,
even when the printer is off.
DIMM-based accessory fonts, macros, and patterns.
Print Resolution 600 dots-per-inch (dpi) with Resolution Enhancement technology (REt)
FastRes 1200 provides 1200 dpi quality at full speed
More than 220 levels of gray
Duty Cycle Up to 150,000 pages-per-month
Printer State
Power Consumption
(average, base unit)
Power Consumption
(average, fully configured
unit)
Printing
(100-127V units)
(220-240V units)
700 Watts
710 Watts
710 Watts
720 Watts
Standby
(100-127V units)
(220-240V units)
145 Watts
145 Watts
155 Watts
155 Watts
PowerSave 1
(default activation time 60 minutes)
30 Watts
32 Watts
38 Watts
(100-127V units)
Page
5
of
7
06/08/2009