Filter
Top Products
[1] Print speed is 32 ppm.
Environmental specifications
Warranty information
One-year on-site limited warranty.
Safety certifications
40 Watts
(220-240V units)
PowerSave 2
(default activation time 10 minutes after
Power Save 1 starts, if nothing else
happens)
20 Watts
22 Watts
22 Watts
(100-127V units)
24 Watts
(220-240V units)
Off 0 Watts 0.25 Watts
(100-127V units)
0.25 Watts
(220-240V units)
Minimum Recommended Circuit Capacity
100-127 Volt 15.0 amps
220-240 Volt 6.5 amps
Power Requirements (Acceptable Line Voltage)
100-127 volts (+/- 10 percent) 50/60 Hz (+/- 2 Hz)
220-240 volts (+/- 10 percent) 50 Hz (+/- 2 Hz)
220 Volt (+/- 10 percent) 60 Hz (+/- 2 Hz)
Acoustic Emissions (Per ISO 9296)
Operating
(Printing) [1]
Power Save 1 /
Standby
Power Save
2
Sound Power Level 6.9 Bel 5.2 Bel Inaudible
Sound Pressure Level, L pAm
(Bystander Position)
53 dB 36 dB Inaudible
Sound Pressure Level, L pAm
(Operator Position)
59 dB 41 dB Inaudible
Operating Temperature 50 to 91 degrees Fahrenheit
(10 to 32.5 degrees Celsius)
Relative Humidity 20 to 80%
Safety IEC 950:1991+A1+A2+A3+A4 / EN 60950:1992+A1+A2+A3+A4
IEC 825-1:1993 / EN 60825-1:1994 Class 1 (Laser/LED)
EMC CISPR 22:1993 / EN 55022:1994 Class B [1]
CISPR 22:1993 / EN 55022:1994 Class A [3]
EN 50081-1:1992
EN 50082-1:1992
IEC 801-2:1991 / prEN 55024-2:1992 - 3 kV CD, 8 kV AD
IEC 801-3:1984 / prEN 55024-3:1991 - 3 V/m
IEC 801-4:1988 / prEN 55024-4:1992 - 1.0 kV Power Lines, 0.5 kV Signal Lines
Page
6
of
7
06/08/2009