Filter
Top Products
12
Setting Up Your Printer with a USB Cable
1
Setting Up Your Printer with a USB
Cable
USB Step 1: Unpack Your
Printer
1 Remove the packing material and
the packing tape from the outside
of the printer
2 Open the top cover. Remove both
pieces of plastic packing material
from the inside of the printer.
3 Close the top cover.
Note: The USB cable set up requires Windows 98. If you are using a parallel
cable for communications between your printer and your computer, go to
page 2.
6410021
6410022
dj895c.book Page 12 Monday, July 12, 1999 11:31 AM