Filter
Top Products
4.
Insert a small, blunt tool into the release hole, and press on the keyboard until it disengages from
the base enclosure.
NOTE: The center of the keyboard is the release point. If the keyboard does not easily
disengage, press on the keyboard through the opening in the upgrade bay area.
5.
Turn the opened computer right-side up, with the front toward you.
6.
Lift the rear edge of the keyboard and then rotate the keyboard (3) forward until it rests upside
down on top of the TouchPad.
NOTE: If you are accessing the memory modules below the keyboard, it is not necessary to
remove the cables or keyboard.
7.
Release the ZIF connector for the pointing stick cable (1) and then disconnect the cable from the
system board (2).
8.
Release the ZIF connector for the keyboard cable (3), and then disconnect the cable from the
system board (4).
Component replacement procedures
73