Filter
Top Products
11. Remove the two screws that secure WLAN module to the system board (2).
12. Lift the module up to a 45 degree angle, and then remove it from the slot at an angle.
To install the WLAN module, reverse the removal procedures.
WLAN modules include a notch that prevents incorrect installation.
TV tuner module
1. Prepare the computer for disassembly (see Preparing to disassemble the HP TouchSmart PC
on page 11).
2. Place the computer face down on a soft, flat surface.
3. Remove the hard drive/memory cover (see
Hard drive/memory cover on page 12).
4. Remove the stand (see
Stand on page 15).
5. Remove the I/O cover (see
I/O cover on page 13).
6. Remove the feet (see
Feet on page 14).
7. Remove the back cover (see
Back cover on page 20).
26 Chapter 4 Removal and Replacement Procedures