Filter
Top Products
System board
1. Prepare the computer for disassembly (see Preparing to disassemble the HP TouchSmart PC
on page 11).
2. Place the computer face down on a soft, flat surface.
3. Remove the hard drive/memory cover (see
Hard drive/memory cover on page 12).
4. Remove the stand (see
Stand on page 15).
5. Remove the I/O cover (see
I/O cover on page 13).
6. Remove the feet (see
Feet on page 14).
7. Remove the hard drive (see
Removing the hard drive on page 19).
8. Remove the back cover (see
Back cover on page 20).
9. Remove the frame support by removing the three screws that secure the frame support to the
computer, and then lifting the support out of the computer.
NOTE: The system board (right) screw is longer than the other screws.
System board 29