Filter
Top Products
• Reference the created HWTACACS scheme in the ISP domain.
For more information, see the Security Configuration Guide.
When users adopt the scheme mode to log in to the device, the level of the commands that the users can
access depends on the user privilege level defined in the AAA scheme.
• When the AAA scheme is local, the user privilege level is defined by the authorization-attribute
level level command.
• When the AAA scheme is RADIUS or HWTACACS, the user privilege level is configured on the
RADIUS or HWTACACS server.
Configuration
Configuring the SSH client to log in to the SSH server
Configur
t without authentication and have user
n to the device with the default configuration,
• For more information about AAA, RADIUS, and HWTACACS, see the Security
Guide.
ation prerequisites
You have logged in to the device.
By default, you can log in to the device through the console por
privilege level 3 after login. For information about logging i
see “Configuration requirements.”
Figure 18 Log in to another device from the current device
d the SSH server are not in the same subnet, make sure that the two devices can reach
NOTE:
If the SSH client an
each other.
Configuration procedure
Follow these steps to configure the SSH client to log in to the SSH ser
mand…
ver:
To do… Use the com Remarks
Log in to an IPv4 SSH server ssh2 server
Pv4 address or host
e server.
Required
server is the I
name of th
Available in user view
Required
Log in to an IPv6 SSH server ssh2 ipv6 server
server is the IPv6 address or host
name of the server.
Available in user view
You can configure other settings for the SSH client to work with the SSH server. For more information, see
the
Security Configuration Guide
.
NOTE:
51