Filter
Top Products
14 Chapter1
Introduction
Installing the Hardware
4. Follow the instructions in your workstation Owner's Guide to reinstall the
workstation’s cabinet.
5. Refer to your workstation Owner's Guide for important information on defining
the boot console and monitor type. Note that you must do this step before
powering on your workstation.
6. Plug the AC power cord into the workstation and power on the workstation.
7. Refer to your workstation Owner's Guide for instructions on using the HP-UX
System Administration Manager (SAM) utility to verify your graphics
configuration.
Supported Graphics Slot Configurations
The following four figures show the supported graphics slot configurations for the
workstation models that support the HP VISUALIZE fxe graphics card. Refer to the
appropriate figure for your particular workstation model.