Filter
Top Products
Adding or replacing a hard drive
CAUTION: To prevent information loss or an unresponsive system:
Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the
hard drive while the computer is on, in the Sleep state, or in Hibernation.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the
power button. Then shut down the computer through the operating system.
Removing the hard drive
1. Save your work and shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Unplug the power cord from the AC outlet.
4. Turn the computer upside down on a flat surface.
5. Remove the battery (refer to
Inserting or removing the battery on page 39).
6. Loosen the screw (1) on the memory module compartment cover.
7. Slide the memory module compartment cover backwards (2), and then remove the cover (3).
8. Loosen the screw (1) on the hard drive service door.
Adding or replacing a hard drive 61