Filter
Top Products
ASUS A7V133-VM User’s Manual 61
4. BIOS SETUP
4. BIOS SETUP
I/O Device Config
Onboard Parallel Port [378H/IRQ7]
This field sets the address of the onboard parallel port connector. If you
disable this feature, Parallel Port Mode and ECP DMA Select configura-
tions will not be available. Configuration options: [Disabled] [378H/IRQ7]
[278H/IRQ5]
Parallel Port Mode [ECP+EPP]
This field allows you to set the operation mode of the parallel port.
[Normal] allows normal-speed operation but in one direction only; [EPP]
allows bidirectional parallel port operation; [ECP] allows the parallel port
to operate in bidirectional DMA mode; [ECP+EPP] allows normal speed
operation in a two-way mode. Configuration options: [Normal] [ECP] [EPP]
[ECP+EPP]
ECP DMA Select [3]
This field allows you to configure the parallel port DMA channel for the
selected ECP mode. This selection is available only if you select [ECP] or
[ECP+EPP] in Parallel Port Mode above. Configuration options: [1] [3]
Onboard Peripheral Resource Control
Onboard Creative Audio Controller [Auto]
[Auto] allows the motherboard’s BIOS to detect whether any network/
audio device is funtional through the onboard Creative Audio Controller
chipset. If a network/audio device is detected, the onboard Creative Audio
Controller chipset controller will be enabled. If no device is detected, the
controller will be disabled. If conflicts arise with the onboard network/
audio controller, set the appropriate field to [Disabled]. Configuration
options: [Auto] [Disabled]