Filter
Top Products
10
Installation Overview
The installation procedure includes the following major steps:
1. Prepare to install the adapter.
2. Shut down the operating system and switch off the power to the
computer.
3. Install the adapter.
4. Attach the adapter to the network.
5. Configure the adapter.
6. Verify operation.
Product Description
The HP-PB 100VG-AnyLAN Network Adapter provides the hardware
needed to interface an HP-PB backplane to a 100VG-AnyLAN Network.
The HP-PB 100VG-AnyLAN Network Adapter has the following
features:
• one built-in connector: an RJ-45 connector, for attachment to the hub
• 10 or 100-Mbit per second operation
• single-high form factor
Product Contents
• HP-PB 100VG-AnyLAN Network Adapter — A3496-60001
• Installation and Service Manual — B5426-90001
Tools and Accessories
Before installation, gather these tools and accessories:
• screwdrivers necessary for opening your computer and installing
adapters
• grounding wrist strap
• cable for attachment to hub, UTP category 3 or 5