Filter
Top Products
Troubleshooting 87
POST Problems Flowchart
Symptoms:
•
•
•
•
•
Server does not complete POST
NOTE: The server has completed POST when the system attempts to
access the boot device.
Server completes POST with errors
Possible Problems:
Improperly seated or faulty internal component
Faulty KVM device
Faulty video device
Item Refer to
1 "POST Error Messages" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on
the HP website (http://www.hp.com/support
).
2 "Video Problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or on the HP website
(http://www.hp.com/support
).
3 KVM or RILOE documentation
4 "Loose Connections (on page 79)"
5 Server maintenance and service guide, located on the
Documentation CD or the HP website
(http://www.hp.com/products/servers/platforms
)
6 Server user guide or setup and installation guide, located on
the Documentation CD or the HP website
(http://www.hp.com/products/servers/platforms
)
7 • "Hardware Problems" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or
on the HP website (http://www.hp.com/support
).
• Server maintenance and service guide, located on the
Documentation CD or the HP website
(http://www.hp.com/products/servers/platforms
)