Filter
Top Products
Removal and replacement procedures 29
2.
Remove the server blade (on page 23).
3. Remove the access panel ("Access panel" on page 24).
4. Remove all hard drives ("Hard drive" on page 25).
5. Remove all hard drive blanks ("Hard drive blank" on page 24).
CAUTION: Remove all hard drives and hard drive blanks before removing the hard drive
backplane.
6. Remove the hard drive backplane ("Hard drive backplane" on page 27).
7. Remove the hard drive backplane retainer.
To replace the component:
1. Install the hard drive backplane retainer.
2. Install the hard drive backplane ("Hard drive backplane" on page 27).
3. Install the hard drives ("Hard drive" on page 25).