Filter
Top Products
Removal and replacement procedures 30
4.
Install the hard drive blanks ("Hard drive blank" on page 24).
5. Install the access panel ("Access panel" on page 24).
6. Install the server blade.
Front panel/hard drive cage assembly
To remove the component:
1. Power down the server blade (on page 23).
2. Remove the server blade (on page 23).
3. Remove the access panel ("Access panel" on page 24).
4. Remove all hard drives ("Hard drive" on page 25).
5. Remove all hard drive blanks ("Hard drive blank" on page 24).
6. Remove the hard drive backplane ("Hard drive backplane" on page 27).
7. Remove the front panel/hard drive cage assembly.
To replace the component, reverse the removal procedure.
Mezzanine card
Optional mezzanine cards enable network connectivity and provide Fibre Channel support. For
mezzanine card locations, see the system board components (on page 55).
To remove the component:
1. Power down the server blade (on page 23).
2. Remove the server blade (on page 23).
3. Remove the access panel ("Access panel" on page 24).