Filter
Top Products
Removal and replacement procedures 27
3.
Remove the access panel ("Access panel" on page 24).
4. Disconnect the cables, and then remove the DIMM baffle.
To replace the component, reverse the removal procedure.
DIMMs
To remove the component:
1. Power down the server blade (on page 22).
2. Remove the server blade (on page 23).
3. Remove the access panel ("Access panel" on page 24).
4. Remove the DIMM baffle ("DIMM baffle" on page 26).
5. Remove the DIMM.
To replace the component, reverse the removal procedure.