Filter
Top Products
9
To Set Up the Interface Pod
Some common system and test connections are
• an intrusive system connection—network element
• remote loopback
• in-line test connections
See the HP E5200A Broadband Service Analyzer User’s Guide or the
Online Help for details about these system connections.
The analyzer automatically sets the interface pod transmit and receive
parameters and configures according to the signal it receives from the
interface pod. See “Automatic Configuration Parameters” on page 10 for
more details.
If you remove the interface pod and replace it with another while you are
logged in to the analyzer, the screen displays the message
Auto configuring, please wait...
Automatically configuring physical interfaces and
protocols according to the monitored signal.
Note The UNI Signaling Test Application does not display a message while it performs auto-
configuration.
Receive (Rx)